Connect with us

Renewable Energy Times

German government plans softer FIT reduction for commercial solar


German government plans softer FIT reduction for commercial solar

The coalition government has reached agreement on the FIT reduction for rooftop PV not exceeding 750 kW in size. According to a draft bill, seen by pv magazine, the FIT will be reduced to €0.0987/kWh from February, with further cuts in March and April, which would take it down to €0.0890/kWh.

The parties that form the German coalition government – the CDU, CSU and SPD – have agreed on a slightly reduced FIT cut for commercial and industrial, 40-750 kW rooftop PV projects.

According to a draft bill of the measure seen by pv magazine, the FIT cut will be implemented early in the new year but will be lower than previously planned, with the government having initially proposed it would fall to €0.0833/kWh.

In the revised draft, which will have to be approved on Friday by the German parliament, it is envisaged the FIT will be reduced to €0.0987/kWh from February 1, with further reductions, to €0.0939/kWh in March and €0.0890/kWh in April. That would add up to an overall reduction of 11% on the current tariff, rather than the 20% originally proposed.

For this month, December and January, the German Federal Network Agency had already determined a digression of 1% – based on newly installed PV capacity deployed in previous months. The current FIT value for commercial and industrial rooftop PV is €0.1057/kWh. In December it will fall to €0.1047/kWh, and in January €0.1036/kWh.

The nation’s Federal Ministry of Economics had originally planned to reduce the FIT, at the turn of the year, to the level of ground-mounted systems, which will be entitled to €0.0833/kWh from New Year’s Day.

After the parliament’s Economic Committee issues its recommendation on the measure, parliament is expected to approve the bill on Friday.

Following publication of the first draft at the end of October, when the industry was surprised by the strong cuts planned, there were numerous responses. Solar energy institute the ZSW said the planned reduction was based on false calculations. The ministry had claimed the solar C&I segment was getting too much support, and EU regulations made the FIT reduction necessary.

Source PV Magazine

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

More in Solar


November 2018
« Oct   Dec »


Subscribe to notifications
To Top
%d bloggers like this: