Connect with us

Renewable Energy Times

EU funds pilot plant for PV module recycling

Solar

EU funds pilot plant for PV module recycling



German company, Geltz Umwelt-Technologie has developed an advanced recycling plant, which it says could recover up to 95% of the materials in a module for reuse. With funding from the EU’s Horizon 2020 project, the company is planning a pilot facility that could recycle up to 50,000 silicon based PV modules per year.

According to the report, ‘End of life management solar photovoltaic panels’, published by the International Renewable Energy Agency in 2016, there will be more than 78 million tonnes of cumulative PV waste material by 2050, the value of which could exceed US$15 billion were it recycled and inserted back into the supply chain.

Looking to get ahead of this problem, expected to become visible from the 2030s onwards, the EU has provided funding to a project for the recycling of silicon solar panels. As part of the project, Geltz Umelt-Technology, a company based in Southern Germany with expertise in waste water treatment, precious metal recovery and other areas, has developed a facility that could greatly increase the amount of reusable materials recovered from a silicon PV module at the end of its life.

“The pilot plant is currently in the testing phase,” says Fabian Geltz, Managing Director at Geltz Umwelt Technologie. “The capacity of the plant per operating cycle is raised slowly to ensure a save operation in test phase and gaining data for further optimization.”

The project’s partners developed an energy efficient pyrolysis process, which destroys unwanted polymer layers and allows the separation of multiple materials, including aluminium, glass, silver, copper, tin and silicon.

“The biggest challenge is to destroy the troublesome polymer layers, which make mechanical separation impossible,” Geltz told pv magazine. “After destroying the polymers via pyrolysis, the remaining materials can be separated without huge effort with state-of-the-art mechanical separation processes. Another challenge is to recycle the valuable metals as complete as possible with high purity.”

The polymer layers Geltz refers to are primarily the backsheet and encapsulant material, which have long been the most problematic components when it comes to module recycling. “They are gasified with the pyrolysis process, then burnt in a thermal afterburner under exotherm conditions,” explains Geltz. “The generated heat can be used to preheat the next pyrolysis cycle, which is not implemented in the pilot unit, but is planned to be used in the first stage of expansion with a second reactor.”

Geltz adds that toxic chemicals resulting from the pyrolysis process are also dealt with at the recycling plant. “To prevent the creation of dioxines, the hot exhaust gas is quenched through the temperature spectrum, in which dioxines can be formed. Created hydrofluoric acid is neutralized by gas scrubbing.”

After further testing to optimize process parameters, the project’s partners estimate that the pilot facility could process up to 50,000 end of life modules per year, recovering more than 95% of recyclable materials. Assuming full capacity operation until the end of 2018, Geltz said he expects the plant to reach break-even point some time in 2019.



Source PV Magazine

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

More in Solar

Categories

August 2018
M T W T F S S
« Jul   Sep »
 12345
6789101112
13141516171819
20212223242526
2728293031  

Follow

Subscribe to notifications
To Top
%d bloggers like this: